F - Type Jaguar - Ceramic Coating

Vehicles

F - Type Jaguar - Ceramic Coating

This amazing F – Type Jaguar came into our Jaguar Specialist detailing studio to undergo a full ceramic coating application.

The client also wanted a deep gloss shine, so we chose two particular products.

Firstly the Kamikaze’s Myabi and secondly the ISM Pro.

The Kamikaze Mayabi is a 2 part coating, that has the best of both worlds with the strength in the base coat.

To finish off and give that superior glossy finish, we applied the ISM Pro, to give that slick glossy top layer.

However, before we could start on this amazing F – Type Jaguar  we had to carry out our standard pre work inspection and preparation

As all vehicles MUST be fully decontaminated and polished before an application to ensure that the coating can fully bond to the surface. Polishing the paint before an application is paramount to the overall finish, if the paint is not polished the ceramic coating will ‘lock in’ swirled paint. Leaving a sub-standard finish.

Prior to any ceramic coatings application Marque One Detailing a Jaguar Specialist will undertake the following steps to ensure the paint is perfectly prepared for the coating. These steps are undertaken on every ceramic application, this is known as the ‘preparation’ stage

Work That was carried out by Marque One Detailing, Jaguar Specialist

However before we could start work on this amazing F – Type Jaguar back to its former pristine best, we had to carry out our standard pre detailing inspection and preparation.

Which included a full decontamination, including the following, before we could start the application of the Ceramic Coating.

Preparation Stage.

 

Full safe wash

Clay bar

De-tar

Water spot removal

Iron fall out remover

Paint depth analysis 

Colour Range Index  (CRI) inspection

1,2 or 3 stage paint correction

Panel wipe

Coating application

24 hour cure time

Pure water rinse and dry

When the above was completed, we were able to then start the process of applying the Ceramic Coating to this car which, included the following from our 

Graphite Ceramic.

 

IGL Quartz or Kamikaze Myabi with ISM PRO

8H Hardness levels 

For more information on our Detailing, Ceramic Coating & Paint Protection packages, including our PPF application services.

Please call us on 07548675497
or 07840039615 | Email us on mark@marqueonedetailing.com
Or you can use our contact form on the contact us page